Solid and Engineered Wood Flooring

Solid wood flooring is a solid piece of wood from the top to the bottom. The thickness varies from ¾” to 5/16”. Those wood floors can be installed both above and on grade, and they can be sanded and refinished during its service life.

Engineered wood floors from other side are also real wood floors made by using multiple wood or wood composite veneers. The veneers can be from the same or from different wood species. It have a great stability because the grain of each veneer runs in different direction. This mean that the wood will resist expanding and contracting during fluctuations in humidity and temperature which is really making it wide usable. This type of flooring can also be sanded and refinished and it can be installed above, on or below grade.

Comments

MAPLE

There are 115 species of maple. Only 5 commercially important species grow in the U.S. Two of the five are hard rock maple and sugar maple. Properties: Maple is so hard and resistant to shocks that it is often used for bowling alley floors. Its diffuse evenly sized pores give the wood a fine texture and even grain. Maple that has a curly grain is often used for violin backs (the pattern formed is known as fiddleback figure). Burls, leaf figure, and birds-eye figures found in maple are used extensively for veneers. The Birds eye figure in maple is said to be the result of stunted growth and is quite rare. Uses: Maple is used extensively for American colonial furniture, especially in medium and lower priced categories. It can also be stained to simulate cherry wood, which it resembles.

What Does Full Stave Worktops Mean?

The addition of a wooden worktop to your kitchen isn't just an attractive and reasonably priced option; it is also highly practical. Wooden worktops come in a variety of different styles. At the less expensive end of the current market, you will find worktops which are made up of relatively short, thin strips, blocks or staves of timber. Thereafter, since the price rises, you'll typically find that staves become wider, broad planks or full staves may be used and in some instances even single pieces of timber might be used to produce the entire worktop. Lean strip or stave worktops are produced by bonding together narrow staves or strips of timber and putting them under pressure to make a fix. Either taken out by hand or by machine, the strips of wood are finger jointed and glued to produce them secure. The finger joints used in this procedure are made by efficiently cutting what seems like"teeth" into and out of alternate staves of wood, creating a large surface a...

Sanding!

We can give you a estimate over the phone or email if you have the dimensions, as we work on a rate per sq meter or sq yard the estimate will allow for minor repairs,sanding and finishing with three coats of varnish.If the price quoted seems reasonable, we will then visit your home to look at the floor and discuss your thoughts, concerns and ideas for the project, we will then send you a written estimate or email you an estimate for the work. If you would like to go ahead we will give you a date on which we will hope to start your room. We do not charge for my estimates or advice.

Cheam Floor Sanding

Search This Blog